Electromagnetic vibration table is widely used in defense, aviation, aerospace, communications, electronics, automobiles, home appliances, and other industries. This type of equipment is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is remarkable and reliable. Sine wave, FM, sweep, programmable, frequency multiplier, logarithm, maximum acceleration, amplitude modulation, time control, full function computer control, simple fixed acceleration/fixed amplitude. Equipment through continuous failure to run 3 months of testing, stable performance, reliable quality.
| Model | Rated Sine Force (N) |
Rated Random Force (N) |
Frequency Range (Hz) |
Rated Acceleration (m/s²) |
Rated Speed (m/s) |
Rated Displacement (p-p) mm |
Max. Loading (kg) |
Moving Coil (kg) |
Dimension of Moving Coil (mm) |
|---|---|---|---|---|---|---|---|---|---|
| ES-6 | 6000 | 6000 | 3-3500 | 1000 | 1.6 | 25 | 180 | 6.5 | Φ230 |
| ES-6a | 6000 | 6000 | 3-3500 | 1000 | 1.6 | 51 | 250 | 12 | Φ230 |
| ES-10 | 10000 | 10000 | 3-3000 | 1000 | 1.8 | 51 | 270 | 14 | Φ240 |
| ES-20 | 20000 | 20000 | 3-3000 | 1000 | 1.8 | 51 | 300 | 30 | Φ320 |
| ES-30 | 30000 | 30000 | 3-2800 | 1000 | 1.8 | 51 | 450 | 40 | Φ450 |
| ES-40 | 40000 | 40000 | 3-2800 | 1000 | 1.8 | 51 | 500 | 50 | Φ450 |
| ES-50 | 50000 | 50000 | 3-2700 | 1000 | 1.8 | 51 | 750 | 50 | Φ450 |
| ES-60 | 60000 | 60000 | 3-2700 | 1000 | 1.8 | 51 | 750 | 60 | Φ450 |
| ES-100 | 100000 | 100000 | 3-2500 | 1000 | 1.8 | 51 | 1000 | 90 | Φ450 |
Automobile Battery EN50604 IEC62133 UN38.3 Vibration Test Bench is designed to simulate the vibration environment that automobile batteries may experience during operation and transportation. The system is used to verify battery reliability, discover early faults, and confirm structural strength, supporting standards such as EN50604, IEC62133, and UN38.3.
Sine wave, FM, sweep, programmable, frequency multiplier, logarithm, maximum acceleration, amplitude modulation, time control, full function computer control, simple fixed acceleration / fixed amplitude. Equipment through continuous failure to run 3 months of testing, stable performance, and reliable quality.
The electromagnetic vibration table is widely used in defense, aviation, aerospace, communications, electronics, automobiles, home appliances, and other industries.
This type of equipment is used for discovering the early faults, simulating the actual working condition, and the structural strength test. The product application is wide, the application width is obvious, the test effect is remarkable and reliable.
EN50604, IEC62133, and UN38.3 vibration qualification for EV and HEV battery packs.
Vibration and shock qualification for defense equipment and weapon systems.
Environmental stress screening for airborne and spaceflight components.
Reliability verification for communication equipment under vibration and shock.
Early fault discovery for electronic assemblies and components.
Simulated transport and operational vibration testing for household appliances.
Every component is matched and calibrated as a complete system — eliminating integration risk and reducing commissioning time on your lab floor.
Air-cooled, lightweight armature with high first-order resonance.
Switching-type, over 90% efficiency, low-distortion output.
DSP closed-loop control with sine, random, shock, and RSTD modes.
Custom or standard interface plates matched to your battery footprint.
Low-noise blower designed for continuous operation.
System work diagram and software function introduction — random control and sinusoidal control interfaces.
Close-up views of key components — shaker body, expander interface, controller cabinet, and installation details.
High-resolution photos and dimensional drawings are available on request.
Send your battery dimensions, weight, and test standard. Our engineering team will reply with a recommended model and fixture solution within one business day.
