Home / Application / LED Lighting / LED Lighting Test Equipment

LED Lighting Test Equipment

Extreme Environmental Simulation & Reliability Solutions for LED Lighting

Accelerated aging and environmental simulation systems for LED modules, chips, drivers, and complete luminaires. Validate your LED products against LM-80 (Lumen Maintenance), LM-79 (Optical Performance), IEC 60598 (Safety), UL 1598 (Luminaires) and other core international standards. Our precise test data ensures your products pass the rigorous audits of Tier-1 lighting OEMs, specifiers, and certification bodies.

CE ISO 9001 ISO 17025 (CNAS) UL CSA LM-80 Test-Ready

Request LED Testing Solution

Certified & Compliant — Global LED Supply Chain Access

Our equipment is designed, manufactured, and calibrated to meet the most rigorous LED lighting industry standards. From CE to UL/CSA, from ISO 9001 to CNAS (ISO 17025) accredited in-house calibration — we provide complete documentation to support your customer audits, Energy Star applications, and DLC (DesignLights Consortium) submissions.

CE EU Market Access

ISO 9001 Quality Management

ISO 17025 (CNAS) Traceable Calibration

UL North American Safety

CSA Canadian Compliance

LM-80 Lumen Maintenance

Industry Insight: Global lighting buyers and specifiers increasingly require sub-suppliers to provide ISO 17025 (CNAS) traceable calibration certificates. Our in-house accredited lab ensures your LED test data is unconditionally accepted for Energy Star, DLC, and UL listings.

Why Specialized Reliability Testing for LED Lighting?

LED products face multiple stresses in real-world applications: thermal stress causing lumen depreciation (LM-80 tracking), high humidity leading to housing fogging or electronic failure, UV radiation causing housing yellowing and material degradation, salt spray in coastal installations, and dust/water ingress for outdoor luminaires. Unvalidated LED products can lead to premature failures, warranty claims, and brand damage. Our test equipment helps you identify failure modes before production, ensuring your products meet the stringent reliability requirements of the lighting industry.

28+ Years Experience

Environmental & mechanical testing since 1997

Global Accreditations

CE · ISO 9001 · CNAS · UL · CSA · LM-80

CNAS-Accredited Lab

In-house calibration traceable to international standards

UL/CSA Design-Ready

North American electrical safety compliance

Global Logistics

Sea/air freight + on-site commissioning

12-Month Warranty

Lifetime remote technical support

Core Solutions: Specialized Systems for LED Stress Profiles

Comprehensive reliability validation for LED components and luminaires — from single LED chips to complete outdoor fixtures, all equipment complies with international lighting standards.

Temperature & Humidity Chambers

LM-80 · IEC 60068 · UL 1598

Simulate extreme temperature (-75°C ~ +180°C) and humidity (10%~98% RH) conditions for LED modules, drivers, and complete luminaires.

Certified: CE · UL/CSA configs · CNAS calibration

Learn More

Fast Rate Temperature Chambers

5~15°C/min · Thermal Cycling

Rapid temperature change testing for LED drivers, power supplies, and outdoor luminaires — simulating thermal stress from day/night cycles and weather changes.

Certified: CE · UL/CSA configs · CNAS calibration

Learn More

Thermal Shock Chambers

IEC 60068-2-14 · JEDEC

Two-zone & three-zone designs with ≤10s transfer time — validating LED modules, solder joints, and driver components under extreme thermal cycling.

Certified: UL/CSA electrical · CNAS performance verification

Learn More

UV Aging Chambers

ASTM G154 · ISO 4892 · SAE J2020

Accelerated solar radiation testing for LED housing, lenses, and coatings — predicting yellowing, cracking, and material degradation.

Certified: CNAS-accredited calibration

Learn More

Salt Spray Corrosion Chambers

ASTM B117 · ISO 9227 · IEC 60068-2-52

Validate corrosion resistance of LED housings, heat sinks, fasteners, and connectors for coastal, marine, and industrial installations.

Certified: UL/CSA controls · CNAS traceable calibration

Learn More

IP Test Chambers

IEC 60529 · IEC 60598 · UL 1598

Sand & dust (IP5X/IP6X) and water spray (IPX1~IPX8) testing — validating seals of LED outdoor luminaires, streetlights, and industrial fixtures.

Certified: UL/CSA components · CE · CNAS calibration

Learn More

Vibration Test Systems

IEC 60068-2-6 · IEC 60598

Simulate transportation and installation vibration stress — frequency DC~3000 Hz, payload up to 500 kg, 3-axis (X/Y/Z) capability.

Certified: UL/CSA controls · CNAS traceable verification

Learn More

Combined Temp-Humidity-Vibration Systems

3-in-1 · Real Environment Simulation

Integrate temperature, humidity, and vibration in one chamber — the most realistic reproduction of actual operating conditions for LED luminaires.

Certified: UL/CSA safety · CNAS traceable calibration

Learn More

LED & Lighting Industry Core Standards

Our equipment fully covers the following international and industry-specific standards — ensuring your test results are accepted by global lighting OEMs, specifiers, and certification bodies.

LM-80

LM-79

IEC 60598

UL 1598

IEC 60068

ASTM B117 / G154

ISO 9227 / 4892

IEC 60529 (IP)

SAE J2020

How We Deliver — From Order to Operation

Seamless commissioning by our Global Application Engineering team — ensuring your equipment is operational in your lab with minimal downtime.

Project Engineering

Customized to your test standards and sample requirements

Factory Acceptance

Pre-tested with your profiles before shipping

Global Logistics

Export packaging, sea/air freight, customs clearance

On-Site Commissioning

IQ/OQ/PQ documentation & training.
Engineers hold EU & North American visas.

Lifetime Support

12-month warranty + remote diagnostics & calibration guidance

Frequently Asked Questions — LED & Lighting Buyers

How do I choose the right equipment for my specific LED testing standard?

We start by reviewing your target standards — LM-80 (lumen maintenance), LM-79 (optical performance), IEC 60598 (safety), UL 1598 (luminaires), or customer-specific requirements. Our application engineers map your test profiles to chamber specifications and provide a documented compliance matrix. For North American projects, we design with UL/CSA components; for European labs, CE is standard. All chambers are factory-calibrated to CNAS (ISO 17025) traceable procedures.

Can you customize equipment for specific LED product sizes or stress profiles?

Yes. We have engineered custom solutions for LED lighting manufacturers — including custom ramp rates for LM-80 thermal testing, custom walk-in dimensions for large outdoor luminaires, and multi-zone independent controls for simultaneous testing of multiple LED modules. Share your specific requirements and we will propose a tailored solution.

What regions do your installation and calibration services cover?

Our Global Application Engineering team holds EU and North American visas and has completed projects for lighting customers in Germany, the UK, the US, Mexico, India, Singapore, and China. We provide on-site IQ/OQ/PQ documentation and offer annual calibration services using CNAS-accredited reference standards.

Do your chambers meet UL / CSA safety standards for North American lighting projects?

Yes — we can design and build chambers with UL/CSA-recognized electrical components and wiring practices. Our engineering team is familiar with North American electrical codes and can provide documentation to support your site safety inspection. Specify UL/CSA compliance at the quoting stage for seamless integration.

How do you support LM-80 / Energy Star testing requirements?

Every chamber ships with a factory calibration certificate traceable to CNAS (ISO 17025) standards. For customers requiring independent verification for LM-80, Energy Star, or DLC submissions, we can arrange third-party calibration or provide full documentation support for your certification audit.

What is your warranty policy?

All ASLI equipment comes with a 12-month warranty covering parts and labor for manufacturing defects. After the warranty period, we offer extended service agreements and lifetime remote technical support — including diagnostics, spare parts sourcing, and software updates.